Radar de memoria de control remoto de inducción del cuerpo humano placa de circuito de lámpara de calle solar 3.2V3.7V controlador de lámpara de calle solar

本公司所售产品为出国外定制产品，国内使用者如是在国内使用请勿下单.

本控制板不带过充过放保护.接电池需电池自带保护板.兼容3.2V磷酸铁锂电池3.7V锂电池.可用于太阳能一体化路灯改装或维修.

本款产品配的遥控器里面没有装电池.需自己在当地购买7号电池使用.

跨境包裹PE透明袋装.重量35g..遥控器电池易购买到.所以不配电池.可空运.

应用LED电压功率：2.8V-3.3V/2A

太阳能电池板最大输入：5V-6V/<20W

感应方式：光控感应+雷达人体感应

感应距离：5-10米

感应时间：高亮约15秒+低亮长亮/灭灯.

This control panel is not equipped with overcharge and discharge protection. When connecting to the battery, a protective panel must be installed. It is compatible with 3.2V lithium iron phosphate battery and 3.7V lithium battery. It can be used for retrofitting or repairing solar integrated street lamps

Microwave induction fully bright for about 10 seconds to slightly bright To facilitate transportation, the remote controller equipped with this product does not contain a battery. You need to purchase a No. 7 battery locally to use it

Applied LED voltage: 2.8V-3.3V./2A

Maximum input of solar panel: 5V-6V/<20W

Sensing mode: light controlled sensing+radar human body sensing

Sensing distance: 5-10 meters

Induction time: high brightness for about 15 seconds+low brightness for long duration/off